Although it doesn't affect anything, many people feel annoyed when the camera shutter sound comes from their phone, especially when taking photos with iPhone. On Android, you can easily turn off the camera shutter sound.
But on iPhone it's different, you must have tips to turn off iPhone camera shutter sound and refer to one of the tips below.
Table of Contents of the Article
Here is a tip that helps you record videos while turning off the shutter sound on your iPhone. Open the Camera app, select video recording and click the start recording button, then you will see a round button in the left corner. Click on it and you will take a picture that the camera captures at that time.
First, go to Settings , scroll down and select Camera > Save settings .
Next, turn Live Photo to green, then go back to the camera, select the Live Photo icon in the middle and take a photo. There will be a small (insignificant) sound when you press the shutter button.
So with the two simple ways above you can turn off the sound when taking photos on iPhone. Especially with the first way when you can both record video and take satisfactory photos.
The easiest way to mute the camera shutter sound on your iPhone is to use the silent button in the upper left corner. When you turn this button on, you will see your iPhone vibrate and the notification on the screen will go into silent mode. This is the simplest way if you want to mute the camera shutter sound quickly.
What to do if the mute button doesn't work? Volume down is the next thing you can try. Use the volume down button on the left side. Hold it down until the volume drops to the maximum. However, you have to do this before entering the camera app, otherwise you will be in burst mode when you hold the button down.
The second way to reduce the volume on your iPhone is to access the Control Center. For iPhone X and above, open the Control Center by swiping down from the right corner of the screen. For iPhone 8 and below, swipe up from the bottom. Slide the volume bar all the way down.
In Control Center, you can also switch your phone to silent mode by tapping the bell icon. When the bell has no cross, the phone is switched to silent mode.
In some countries like Japan and South Korea, the iPhone camera shutter sound cannot be turned off. If you have a phone manufactured in these countries, there is no way to turn off the camera shutter sound. In case you need silence, you can plug in headphones to mute the sound or use a third-party camera app.
You can also try a rather strange way, which is to turn on music and then take a photo to hide the camera shutter sound on the iPhone. We will open the music player on the iPhone, then exit this interface and open the camera on the iPhone to take a photo. The photo will be taken immediately and the sound will be somewhat hidden.
Using headphones is also a very useful way to mute the camera shutter sound on iPhone. You won't have to worry about the camera shutter sound leaking out or having to turn on music to cover up the iPhone camera shutter sound.
One way to quickly mute your iPhone is to use Assistive Touch, where you just need to tap on the virtual Home button icon.
Step 1:
In the Settings interface in iPhone, we click on Accessibility and then click on Touch .
Step 2:
Continue to click on AssistiveTouch and then activate the virtual Home button on the iPhone if it is not already on. Look down below and click on Customize control menu .
Step 3:
Now we click on the - icon to cancel other quick access icons and when there is only one item left , click to change . Next we click on Mute and then click Done to save.
When we take a screenshot on the iPhone, to turn off the shutter sound is very simple, you just need to turn on the silent switch on the left side of the phone and you're done. Then you will take a screenshot on the iPhone without sound.
Set up the right Live Patching path for SLES 16.0 or 15 SP7, apply eligible kernel fixes, and confirm what is active without confusing it with a reboot-required kernel update.
Load a custom SLES 15 kernel module without disabling Secure Boot. Match the running kernel, sign the .ko file, enroll a MOK key, and verify loading.
SLES 15 SP5 can migrate online to SP6, but each node must reboot. Use a tested rolling upgrade or blue-green cutover to keep workloads reachable.
Use SUSE’s supported STIG profile to scan SLES 15, test remediation, review remaining findings, and retain assessment evidence.
Trace a failed Cockpit connection through DNS, port 9090, the systemd socket, firewalld, TLS, and login settings using current SUSE guidance.
Create a redundant Ethernet connection on SLES 15 with YaST and Wicked, configure active-backup bonding, and verify both ports and failover.
Turn an existing SLES 15 system into a reviewed AutoYaST profile, validate it, and use it to deploy a test server with fewer manual steps.
Install the SLES 15 KVM and libvirt tools, enable the right host service, and configure selected virtual machines to start after a reboot.
Use systemd jobs and the previous boot journal to locate a slow service, mount, or storage dependency, then correct it without masking the cause.
Use firewall-cmd to inspect the active zone, allow HTTP safely, preserve SSH access, and verify that the rule survives a reload on SLES 15.
