How to overcome the condition that the washing machine cannot spin

After pressing the button for washing machine to start washing, you are sure that the machine is working properly, but when you open the inspection lid, you will be surprised because the drum machine contains a lot of water. This phenomenon has been bothersome and annoying to many users, but it is not without a fix. WebTech360 will provide you with the reasons and how to fix the washing machine not spinning.

The washing machine cannot spin: Common causes and solutions

1. The washing machine water supply hose is clogged

The washing process of the washing machine is basically as follows: In the first round of water, the machine only rinses all the clothes in the container to continue the wash cycle in the next cycle. However, when the water supply pipe to the machine is malfunctioned, there is no water leading to the machine, the washing cycle will automatically stop this washing cycle and therefore cannot spin dry clothes.

In this case, the clothes in the machine will remain wet while the water has been drained out through the duct. The way to fix the washing machine can not spin in this case is to check the water supply system again, see if the water supply valve to the washing machine is open or if the pipe is blocked by dirt. In addition, if the water force leading to the machine is too weak, you should also equip a booster pump system to make the water more powerful and even.

A weak water force can cause the washing machine to fail to spin

2. The drain hose is clogged

A drain hose (also called a drain hose) is a pipe that drains water from the washing bucket to the outside. The washing machine will not spin until water in the drum has not been drained. The most likely cause is that the drain hose is blocked by something or is too dirty.

If this is the case, check the entire drain hose for any obstructions inside and should clean the end of the pipe so that no dirt closes. If checking the drain hose is still normal but the washing machine cannot spin, it is possible that the fault is in the drain valve system inside the machine. At this point you should call the company or its product warranty center for the best technical support.

Check the drain hose condition.

2. The wash eye cover is still open

This is the most common cause of the washing machine failure to spin. Almost all washing machine products on the market have a safety system installed that prevents the washing machine from operating while the lid is left open. So before running the washing machine, you need to double check whether you have closed the lid or not.

Close the lid tightly so that the machine can automatically wash.

3. The program installed in the washing machine is defective

This is very rare because the production of any technology is a synchronous process. However, for some technical reasons, products still appear on the market from time to time with faulty internal installation programs. Or in unstable weather conditions, humidity and temperature are sometimes the cause of the controller circuit being affected badly.

There is also another possibility that you accidentally put magnetic devices or emit electromagnetic waves such as magnets, phones on the central controller of the washing machine. The central control panel is where the washing machine control program memory is installed by the manufacturer, so if the magnetic devices are close, it may affect the washing machine's performance.

In case the washing machine cannot spin due to a program error, you should contact the warranty carrier for timely repair.

Faulty setting program may result in the washing machine not spinning.

4. The washer belt or motor is damaged

For washing machines that use belts, after a long period of use, the belts will stretch, slip out of the engine, and the washing machine cannot spin. As for the washing machines using direct drive systems that do not use belts, it may be due to the engine malfunction.

In this case, home repair will be very difficult because it requires a lot of technical expertise as well as support tools, so you should contact the company for warranty.

For a cause caused by a belt or transmission system, you should contact the manufacturer for service.

What should be noted when fixing the washing machine not spinning

When you find the cause of the washing machine not spinning, take care to remove all the power cords. This is very important because it ensures the operator's safety during the inspection process. In addition, if you have ruled out the failure of the machine not due to the above reasons, you need to bring to a reputable repair site or place of purchase if there is a warranty period. Don't go too far into self-correcting if it is out of your control as it will only aggravate the situation.

>> See also: What  causes washing machine not washing?

>> See also:  Summary of common errors when using the washing machine and how to fix it

The above are the causes and solutions when the washing machine does not spin. To use the product for a long time, you should regularly check the status of the device to avoid unnecessary damage. At the same time, you should also prioritize buying products in reputable places so that you can apply after-sales services.