Enable easy mute on Samsung Galaxy Note 8
The feature allows to mute incoming calls and alarms by placing your hand on the screen or turning the phone upside down.
Users will feel the iPhone's battery quality is significantly reduced even after a period of use. Here are some of the reasons why this may happen:
+ Regular use of improper chargers to Apple standards will cause the battery to be affected, in the long run it will cause the battery bottle.
+ Users have the habit of both using and charging the iPhone battery , this makes the battery constantly work non-stop.
Use while charging iPhone
+ Another reason is using iPhone at high frequency, not giving iPhone time off . In Vietnam, many users have the habit of using iPhone all day, the frequency can be up to 18 hours per day, causing the iPhone to operate continuously, the battery will be affected.
+ The battery is fully charged quickly and also quickly runs out of battery. A battery without bottle has a charging time of 2-3 hours while a bottle with a bottle has a charging time of only 30-45 minutes .
Bottled batteries usually have short full charge times
+ Playing games on iPhone will quickly drain the battery, but if you do not play games but only use common tasks such as texting, listening to calls, surfing the web, ... and the battery is still running out quickly, then the battery is bottle.
+ Another way to identify is that you have just fully charged the battery (100%), but the battery drops continuously for a short time even though you have not used too many tasks on the iPhone.
+ Step 1: Open the Battery Status item
You open Settings > Select Battery > Select Battery Status .
Open the Battery Status section
+ Step 2: Observe the capacity of the battery
You can see if the battery is bottled or not by looking at the capacity in the Maximum capacity section .
Check maximum capacity
If the result is over 80% then your battery is of good quality, the battery bottle status has not appeared. Conversely, if the battery is below 80% your battery has been bottle, you should consider replacing the battery.
In addition, you can see if the battery you are using is genuine by looking at Peak Performance Capacity .
If the message "Your battery is currently supporting normal peak performance" appears, the battery is genuine, but if the message "This iPhone cannot determine battery status" appears , this is not genuine battery.
The notice shows that your battery is genuine
+ Step 1: Download and install 3uTools software
Software download link: HERE .
After downloading the software to your computer, go to the Downloads folder > Double-click on the 3uTools file to install.
Double click to install
Click Install .
Install button
Click Launch .
Launch button
+ Step 2: Update Driver and connect iPhone to computer
Click Install Drive to update the Driver as required by the software.
Update Driver
You connect the iPhone to be tested to the computer that has just installed 3uTools via a Type-C - USB cable or a Lightning - USB cable .
+ Step 3: Check iPhone battery
You open the software to start checking the battery. For the number of times you have charged the battery, look in the Charge Times section and the Battery Life section for battery life.
Observe the charge times and battery life
According to information from Apple , the best battery quality is about the first 500 charges . Later, the quality of the battery will decrease gradually due to chemical aging in the battery as well as due to the constant usage habits of users.
Next, you can check if the battery you are using is genuine by clicking the View Verification Report button .
View Verification Report button
You observe the Battery Serial Number line , if the blue "Normal" appears, the battery is genuine, but if the red "Battery may be change" line appears, the battery is not genuine.
How to check the battery is genuine
The battery is an important part of the iPhone, so you need to refer to the following ways to keep the battery durable, avoid deterioration of battery life and avoid battery bottle condition:
- iPhone operating stable at temperatures from 0-35 ° C and higher at 20 - 45 ° C . If you use iPhone at temperatures higher than the above levels, the battery cells will be affected, unable to retain energy, causing the battery to damage easily.
- When using iPhone, you should charge the battery when it is below 20% . Do not use until the battery is depleted, power down, and then charged.
Do not let iPhone power down and then charge
- You can use Battery Saver mode when your iPhone's battery goes below 20% and you can't charge it right away. To open the mode, go to Settings > Select Battery > Enable Low Power Mode .
Turn on Battery Saver mode
- Use original chargers instead of chargers of unknown origin in the market.
- Limit charging while using iPhone, this will cause the battery to heat up affecting battery life. In some cases, charging while using it can overload the battery, resulting in fire or explosion .
- Plug in the charger overnight without affecting battery life. iPhone will automatically stop charging when the battery is 100% fully charged, so you can rest assured to charge your iPhone all night.
When fully charged, iPhone will automatically stop charging
See also :
>>> How to check the app version on iPhone, iPad, Android phone
>>> 5 tips for using iPad like a real laptop
Above is the information about the cause, how to identify bottle iPhone battery, how to use to avoid this situation as well as how to check through the phone and computer. Thank you for watching and see you in the following articles.
The feature allows to mute incoming calls and alarms by placing your hand on the screen or turning the phone upside down.
Manage the games on your computer into a folder that makes it easier for you to use.
When this feature is enabled, Samsung Galaxy Note 4 will have the function of pressing the volume up and down keys to take pictures or zoom when recording videos.
Checking for software updates on Samsung Galaxy J7 Pro helps the device enjoy changes and fix system errors.
The feature allows the lock screen wallpaper to change to different effects when you tilt your phone in different directions.
Touchpoint is a technology that allows on a screen surface the ability to recognize the presence of more than one or more than two points.
In some special cases you need to save the call recordings.
The widget on your device helps you monitor and quickly access the applications on your device.
How to unlock the screen Samsung Galaxy S7 Edge used in case you forgot the password and can't open the device, plus the following unlocking method does not lose your data.
Swipe your contacts or phone to the right to make a call, to the left to send a message.
Delete installed apps
You can connect your phone to your computer via a USB cable to retrieve and copy data.
Outdoor mode helps you see and manipulate the screen more accurately.
The feature allows you to hide apps that you want to keep from being seen by others.
The feature allows you to turn off drawing permissions on other applications on your device.
Your device vibrates when picked up to notify you of missed calls and messages.
The more touch points a touch phone has, the smoother and more responsive the touch will be.
You can send an emergency message to recipients in an emergency situation by pressing the power button 3 times in a row.
The biggest disadvantage of the portable Samsung Galaxy Note 3 models is that it does not support the Vietnamese language that comes with the operating system.
The location feature helps locate you or your phone if it is lost or accidentally lost somewhere.