Created by Hirens USB ghost boot Windows 10, 8.1, 7

Related article

• Detailed instructions on how to create Hiren's USB / CD
• How to Win 7 Disc ghost Hiren's Boot CD
• How to win 7 ghost, ghost windows 7 via USB, Onekey, Norton Ghost
• Hiren's integrated into the HDD

Your computer crashes frequently and runs very slow, and you want your computer ghost again broken drive recovery solution that could only install via USB, but you are not proficient in creating bootable usb . This article will guide you taimienphi.vn detailed and specific steps you can create USB Boot a most efficient way ....

See how to create video USB Boot function Hiren'n

Prepare:

1. 1 USB up to 1GB capacity.
2. Hiren Boot installer, you can download the latest installation here: download Boot Hirent .
3. The installer grub4dos: download Gub4dos .

Instructions on how to create bootable USB with Hiren's Boot

Step 1 : Format USB

You should use HP USB Disk Storage software to format the USB Format Tool: download the HP USB Disk Storage Format Tool

Select Quick Format , and click " Start "to run the USB Format (Figure below)

Step 2 : Format the USB process completes, unzip the folder you grub4dos downloaded above, and then run the file grubinst_gui

- Position 1 : You tick the box Disk , then click to refresh and then select USB to identify you want to create Hiren's Boot (NOTE choose the correct USB need to create)

- Position 2 : Part list , click to refresh and select the Whole disk (MBR) (Pictured above)

Click Install to run, then the program will pop up that looks like below. Continue to press the " Enter "to exit,

Then you enter the folder grub (in grub4dos) and copy 2 files grldr and menu.lst into formatted USB above (Figure below).

Step 3 : With Hiren boot folder have downloaded above, you also extract to a separate folder. Then copy all the files in that folder on the USB. And so we've got a bootable USB disk Hiren boot instead used to negate the computer problem.

Step 4: To launch the USB attached to your computer before you launch, tune in to the computer BIOS to boot from USB instead of boots with hard drives (depending on each type of machine that accessing the BIOS will be different together, usually you press Delete or F2 or F12 ...). And since it can use them as a CD Hiren's Boot really without having to have the CD Rom.

Posts on here we guide you how to create usb boots, Hiren's Boot via USB, so that every time the computer encountered a problem that does not have a CD drive, you can use USB to mount the computer Ghost.

Tip You can refer to how to create usb boots Windows with the software Windows 7 USB / DVD Download tool

Watch a video on how to create functional USB Hiren's Boot

Update new 2021

How to create USB Boot using Hiren's BootCD

Step 1:  Prepare to create USB Boot, USB Ghost for Windows

• USB capacity from 1 GB or more
• Tool to format, format the USB. Should use USBFormat, download link here!
• Tool to create bootable for USB: grub4dos.zip
• Toolkit to boot and edit the computer: Hiren's BootCD 15.2

Step 2: Format USB to FAT32 standard

To ensure the USB works and boots normally, you need to convert the current USB format to FAT32 format. Run the downloaded USBFormat tool above, extract and run the  usb_format.exe  file :

Here you choose as shown to format the USB to FAT32 instead of NTFS:

• Select the correct  USB  device in the  Device  section .
• Select  FAT32  in the  File system  section .
• Click  Start  to begin the format. This process takes place quickly and slowly depending on the read and write speed and capacity of the USB (in the test I format the  8GB USB  drive takes about 15 minutes).

When the USB format is complete, you will see a message like this

If you want to know how to get back, break Windows password or when you forget, follow this guide by using the tool in Hiren Boot!

Step 3: Run Grub4Dos Installer to create bootable USB

Unzip  "grub4dos.zip"  > run  "grubinst_gui.exe"  to create bootable for USB following the steps as shown below.

Steps to create USB Ghost Windows

Specifically, run Grub4Dos Installer as follows:

• Click  Refresh (1)  in the  Disk  section to select the correct  USB (2).
• Click  Refresh (3)  in  Part List  to select  Whole disk (MBR) (4).
• After making sure to select the correct items above, press the  Install  button  (5).

Do as shown to create USB Hiren Boot

Follow this guide to create USB ghost, install Windows

Step 4: Extract Hiren's BootCD file and copy it to USB

Unzip  "Hirens.BootCD.15.2.zip"  >  into the unzipped folder  > select  "Hirens.BootCD.15.2.iso"  unzip and copy all files in it to USB.

Step 5: Copy the grldr file and menu.Ist to the newly created bootable USB

Copy two files  "grldr"  and  "menu.lst"  and paste into USB Hirenboot just created. So where are those two files  "grldr"  and  "menu.lst"  ? You can get it from:

• Grub  directory after extracting the  grub4dos.zip  file  .
• In the main folder  HBCD  extracted from the  ISO  file of  Hiren Boot.

After creating the bootable USB, plug the USB into the computer, reboot and enter the BIOS . Depending on the model and the operating system, the way to enter the BIOS will be different, usually using keys such as F12 or Delete. Once in the BIOS, you choose the boot mode (boot) from USB , here, we can proceed to reinstall Windows and perform other jobs as needed.

Our boot screen should look like this:

Mini Windows XP in HirenBoot USB

Above is a very detailed guide to creating a bootable USB with Hiren's bootCD. With the newly created bootable USB, you can use ghost Win, install Windows, extract ghost or fix Windows error when needed. This method will be especially useful when your computer has problems that you cannot restart normally or do not have a CD drive to install Windows from a disc .

If you feel that creating a bootable USB with Hiren's boot is too complicated, you can try to refer to Rufus, a very easy to use bootable USB tool, with just a few clicks you already have a bootable USB, just another is with Rufus you need only Windows ISO file .