How to use an Electrolux air conditioner

Today, air conditioning is more and more modern and smarter. However, this means that it is difficult for users in the process of using it. Below WebTech360 will guide you how to use an Electrolux air conditioner .

The following article uses illustrations from Electrolux ESM09CRF-D4 1.0 HP air conditioner

How to use Auto mode

When AUTO mode is selected, the air conditioner will automatically select either COOL, HEAT (if available) or FAN, depending on the set temperature and / or room temperature.

+ Start Auto mode

Step 1: Press the ON / OFF button to turn on the air conditioner. The digital display showing the temperature on the camera body will light up.

Step 2: Press the Mode button to select AUTO mode.

Step 3: Press the Control button to adjust the temperature you want.

The air conditioner will start operating in about 3 minutes.

+ Turn off Auto mode

To turn off Auto mode, press the ON / OFF button again to turn off the air conditioner. Meanwhile, the horizontal flap will return to its original position when the engine is turned off. If you are not satisfied with AUTO mode, you can adjust the mode yourself as you like.

Note: When AUTO mode is turned on, fan speed is automatically adjusted and cannot be set manually.

How to use DEHUMIDIFY (Dehumidification) mode

DEHUMIDIFY mode works based on the difference between the adjusted temperature and the actual room temperature. The room temperature is adjusted during the dehumidification process by switching between COOLING and FAN modes.

+ Start the Desiccant mode

Step 1: Press the ON / OFF button to start the air conditioner. The digital display showing the temperature on the cold body will light up.

Step 2: Press the Mode button to select DEHUMIDIFY

Step 3: Press the Control button to adjust the desired temperature. Normally, the temperature is set from 210C to 280C.

+ Turn off the Desiccant mode

To turn off Dehumidification, please press the ON / OFF button again to turn off the air conditioner. Meanwhile, the horizontal flaps will return to the old position when the engine is turned off.

Note: In DEHUMIDIFY mode, the fan's rotation speed is fixed at Low and the Turbo function cannot be used.

Cooling & Heating mode (Air cooling and heating)

+ Start Air Cool and Warm mode

Step 1: Press the ON / OFF button to start the air conditioner. The digital display showing the temperature on the cold body will light up.

Step 2: Press the Mode button to choose either COOL or HEAT mode (if compatible)

Step 3: Press the Control button to set the desired temperature. Normally, the temperature is set at between 210C and 280C.

Step 4: Press the Fan button to select the desired fan speed at the levels: Auto, Low, Medium and High. The default fan speed is Auto.

Note: Fan rotation speed is not displayed on the remote if Auto is selected.

+ Turn off air cooling and warming mode

Press the ON / OFF button again to turn off the air conditioner. Meanwhile, the horizontal flaps return to the position when the engine is turned off.

FAN (Blower) mode

When you select the FAN mode, the air conditioner will only ventilate the inside of the room.

+ Start fan mode

Step 1: Press the ON / OFF button to start the air conditioner. The digital display showing the temperature on the cold body will light up.

Step 2: Press the Mode button to select the FAN mode.

Step 3: Press the Fan button to select the desired fan speed in the levels: Auto, Low, Medium and High. The default fan speed is Auto.

+ Turn off the fan mode

Press the ON / OFF button again to turn off the air conditioner and the horizontal flap will return to the position when the engine is turned off.

Note: Fan rotation speed is not displayed on the remote if Auto is selected.

How to adjust the wind direction

When using the air-conditioner, it is necessary to adjust the airflow direction appropriately, otherwise the air flow can cause discomfort and create uneven room temperature.

+ To set the vertical wind direction (up / down) automatically

You can set the vertical wind direction while the machine is operating.

Step 1: Press the Swing button on the remote control, the horizontal spoiler will automatically move up and down.

Step 2: When the flap moves to the desired position, press the Swing button again and the flap stops at that position.

Step 3: Press the Swing button again and the flap will move up and down automatically.

+ Adjust the horizontal wind direction (left / right) manually

To adjust the horizontal airflow direction (left / right), manually adjust the vertical flaps using the Left / Right levers of the vertical flaps. However, it is advisable to adjust the fan blades before you turn on the air-conditioner because once the machine is in operation, your fingers may become stuck on the blades.

+ Note:

- Swing button will be locked when the air conditioner is inactive (even in On Timer mode)

- Do not open the air conditioner for a long time with downward airflow in COOL or DEHUMIDIFY mode. Otherwise, condensation can appear on the surface of the horizontal flaps and fall onto floors or furniture.

How to use I Feel mode

The remote control acts as a remote thermostat, for precise temperature regulation and great convenience.

+ Start I Feel mode

To start the I Feel mode, direct the remote control towards the air conditioner and press the I Feel button, the unit will beep to confirm the function has been started. At that time, the I Feel icon will be displayed on the remote control's screen.

At this time, the air conditioner will operate so that the temperature at the remote control position reaches the set level. The remote control sends temperature information at the remote location to the camera body every 10 minutes.

+ Turn off I Feel mode

To turn off this mode, simply press the I Feel button or the air conditioner will automatically exit I Feel mode. In addition, if the remote control does not receive temperature information for 11 consecutive minutes, the I Feel mode will automatically cancel.

Some air-conditioners have I Feel mode

WebTech360