Instructions for installing and using IVCam - Turn your phone into a webcam

iVCam is a software associated with the phone application that "transforms" the smartphone into a sharp webcam with a few simple steps . Let's Download.vn learn how to use iVCam in the following article. 

Instructions for installing and using IVCam - Turn your phone into a webcam

Install and establish a connection for iVCam

First of all, we need to download iVCam software on the computer and install it: 

Download iVCam for PC

After installation, proceed to  Restart the computer. This is a required step  for the software to complete the driVer setup on your computer. If you do not restart, you will not be able to connect. 

Next, download and install the iVCam application on your phone according to the device's operating system: 

Download iVCam for Android Download iVCam for iOS

After installing the application, use a USB cable and connect your phone to your computer (port 3.0 will connect better than port 2.0).

Now, open up iVCam software on the PC. Interface connection will appear as shown below. 

Continue to open iVCam application on the phone (make sure the phone is connected to the computer successfully). Immediately, the device search interface will appear and automatically detect the connected computer. If not found, please press the refresh button as shown below to make the phone search again. 

After successful connection, the iVCam screen on the computer and phone will display images from the phone's camera. So you have successfully connected already. Now you can access any video call application like Skype, Messenger or online meeting applications like Zoom Meeting, Webex Meeting ... and feel free to use your phone as a webcam with high resolution. strokes. 

Some settings for camera while using iVCam

iVCam, in addition to merely transmitting images from the phone camera, also provides quite a lot of useful functions for users. To set up these features, you can do it on both the computer and the phone, and the way is similar (On the phone, touch the screen to show the function buttons). 

In the interface of iVCam PC software, to set the image for the camera, click the Camera Setting  button with gear in the lower right corner. Or we can also press Ctrl + D. 

The Camera Settings dialog box will appear. We will only care about the function in the Controls section including the numbered buttons as shown below. 

( 1 ): Turn on the camera flash. 

( 2 ): Turn on the beauty function. 

( 3 ): Rotate the image vertically.

( 4 ): Rotate the picture horizontally.

( 5 ): Switch the front and back cameras. 

I wish you successful implementation!

Why buy a webcam since you already have an iPhone / iPad?

iVCam turns your iPhone / iPad into an HD webcam for Windows PC. You can also replace your old USB webcam or integrated webcam with it, which has better quality. At the same time it is also a perfect baby monitor, spy camera, security camera and pet camera.

Not enough space on your device? IVCam can record the video directly on your PC, it works as a remote video recorder!

Setting up iVCam is very simple - just download and install our client software on your PC and you're good to go! The connection is fully automatic and does not require manual configuration.

Main features:

- High quality video in real time, with low latency and high speed

- Automatic connection via WLAN or USB and easy to use

- Connect multiple devices to a PC at the same time

- Support for the most common video sizes, such as 4K, 1080p, 720p, 480p, 360p

- Configurable for video frame rate, quality and encoder

- Compatible in landscape and portrait mode

- Supports front and rear camera, being able to change in real time

- Support for facial beauty, flash, manual focus and mirror video

- Compatible with audio, use your smartphone as a wireless microphone for PC

- Completely replaces the built-in or USB webcam, compatible with most applications that use the webcam

- Preview video, take photos and record video files with our Windows client

Install the necessary Windows client at http://www.e2esoft.com/ivcam.