Home
» Wiki
»
WiFi doesn’t have a valid IP configuration error? 10 Ways to Fix it!
WiFi doesn’t have a valid IP configuration error? 10 Ways to Fix it!
WiFi doesn’t have a valid IP configuration error is caused because of a miss-match in the IP address configuration. Dynamic IP configuration is already enabled by default so that a user doesn’t need to manually enter the IP address to connect to a network. But because your WiFi and the network have the different IP address, you won’t be able to connect to the internet, and hence you get the above error.
Generally, the user tries to run network troubleshooter when they are not able to connect to the wireless network, or they see a limited network connection. Still, troubleshooter only returns the error “WiFi doesn’t have a valid IP configuration error.” So without wasting any time let’s see how to actually fix this issue with the below-listed troubleshooting guide.
11. Download and install the latest driver from the manufacturer’s website, then restart your PC.
Method 5: Change Network Adapter Settings
1. Press Windows key + R, then type ncpa.cpl and hit enter.
2. Now right-click on your WiFi (NIC) and select Properties.
3. Select Internet Protocol Version 4 (TCP/Ipv4) and click Properties.
4. Make sure the following are checked:
Obtain an IP address automatically
Obtain DNS server address automatically.
5. Click Ok and exit WiFi properties.
6. Reboot to apply changes.
Method 6: Disable IPv6
1. Right-click on the WiFi icon on the system tray and then click on “Open Network and Sharing Center.”
2. Now click on your current connection to open Settings.
Note: If you can’t connect to your network, then use an Ethernet cable to connect and then follow this step.
3. Click the Properties button in the window that just open.
4. Make sure to uncheck Internet Protocol Version 6 (TCP/IP).
5. Click OK, then click Close. Reboot your PC to save changes.
Method 7: Use Google DNS
1. Go to your Wi-Fi properties.
2. Now select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
3. Check the box saying “Use the following DNS server addresses” and enter the following:
Preferred DNS server: 8.8.8.8
Alternate DNS server: 8.8.4.4
4. Click OK to save, then click close and restart your PC.
Method 8: Enable Wireless Network Related Services
1. Press Windows Key + R then type services.msc and hit Enter.
2. Now make sure the following services are started and their Startup type is set to Automatic:
DHCP Client Network Connected Devices Auto-Setup Network Connection Broker Network Connections Network Connectivity Assistant Network List Service Network Location Awareness Network Setup Service Network Store Interface Service WLAN AutoConfig
3. Right-click on each of them and select Properties.
4. Make sure the Startup type is set to Automatic and click Start if the service is not running.
5. Click Apply, followed by OK.
6. Reboot your PC to save changes.
Method 9: Set the channel width to Auto
1. Press Windows Key + R then type ncpa.cpl and hit Enter to open Network Connections.
2. Now right-click on your current WiFi connection and select Properties.
3. Click the Configure button in the Wi-Fi properties window.
4. Switch to the Advanced tab and select the 802.11 Channel Width.
5. Change the value of 802.11 Channel Width to Auto then click OK.
6. Close everything and reboot your PC to save changes.
Method 10: Perform a Clean Boot
Sometimes 3rd party software can conflict with System, and therefore the System might not shut down completely. If Fix WiFi doesn’t have a valid IP configuration error, you need to perform a clean boot in your PC and diagnose the issue step by step.
That’s it you have successfully Fix WiFi doesn’t have a valid IP configuration error but if you still have any questions regarding this guide then feel free to ask them in the comment’s section.