Updated: 19 November 2026, 2:11 p.m. AEDT (UTC+11:00).
BMW Australia’s latest listed car recall warns that an improperly sealed water-pump electrical connector could admit moisture and short circuit, raising the risk of fire. Published on 18 November, notice REC-006773 covers 13,696 specified BMW vehicles from model years 2011–2018. The regulator advises owners of affected vehicles to park outdoors, away from buildings and other vehicles, until the recall is completed. A remedy is not yet available; BMW says owners will be contacted when it is ready, and any required repair will be free.
Destaques- Australia’s latest BMW car notice is REC-006773, published 18 November 2026.
- It lists 13,696 vehicles across selected 2, 3, 4 and 5 Series, X1, X3, X5 and Z4 models from 2011–2018.
- The immediate precaution is to park affected cars outdoors and away from structures and other vehicles.
- The repair is pending; use the VIN list or contact BMW Australia to confirm whether a specific car is included.
Which BMW models are named in Australia’s latest recall?
The Australian Government’s Vehicle Recalls database names BMW 228i, 325i, 328i, 428i, 520i and 528i, as well as X1, X3, X5 and Z4 vehicles in the 2011–2018 year range. The notice says the recall applies to the affected vehicles identified by their VINs, so a model name and year alone cannot establish that an individual car is included. The government notice provides a downloadable VIN list and identifies the campaign as 0012910600.
Owners should check the complete notice and VIN list at the Australian Government recall record REC-006773. They can also confirm details through BMW Australia’s recall site or an authorised BMW dealer.
What is the water-pump defect and what is the risk?
The notice says the water-pump connector may not be properly sealed. Moisture can reach the electrical connector over time and cause a short circuit. The regulator warns of possible fire, smoke or a burning smell while driving or when exiting the vehicle. A vehicle fire could put occupants, other road users and bystanders at risk and damage property.
The safety direction is precautionary: if your vehicle is confirmed as affected, park it outside and away from structures and other vehicles until the recall has been completed. Do not treat the model list as proof that your particular car is affected—or assume it is clear because it has not shown symptoms. Confirm the VIN status with BMW Australia or the regulator’s listed VIN file.
What should Australian BMW owners do now?
- Find your vehicle identification number (VIN), usually visible through the windscreen or on vehicle paperwork.
- Check it against the VIN list linked from the official recall record, or contact BMW Australia on 1800 243 675.
- If your car is listed, follow the outdoor-parking advice and contact BMW or an authorised dealer for guidance.
- Keep your contact details current with BMW so you can receive the remedy appointment notice.
BMW Australia’s notice says the company will contact affected owners once a remedy becomes available, arrange an inspection and carry out any required repairs free of charge. The recall page does not provide a remedy date. Owners should therefore check with BMW for current advice rather than infer a repair schedule.
How does this differ from the recent US BMW alert?
A separate US notice may appear in search results, but it is not the Australian recall record. On 13 November, the US National Highway Traffic Safety Administration announced a park-outside recall covering 720,796 vehicles, with the same broad water-pump connector moisture and short-circuit concern. That US notice names different affected populations and says the remedy is in development. Its vehicle count, model applicability and contact instructions should not be applied to Australian cars.
For Australian owners, the relevant record is the one published by Australia’s Department of Infrastructure. Its current listing identifies 13,696 affected units for REC-006773 and gives BMW Australia’s local recall hotline. Recall campaigns can differ between markets because the affected vehicles and VIN populations are defined separately.
What happens next?
The confirmed next step is owner contact once BMW has a remedy ready; the Australian notice does not state when that will happen. Until then, owners who verify that their VIN is included should follow the regulator’s parking direction. If the car produces smoke or a burning smell, treat that as an immediate safety concern and seek help in a safe location.
Sources checked: Australian Government Vehicle Recalls — BMW REC-006773; Vehicle Recalls Australia latest recalls; US NHTSA consumer alert.
FAQ
Is every BMW from 2011 to 2018 affected?
No. The notice lists specified models and affected VINs. Check the VIN against the official list or ask BMW Australia.
Can I park an affected BMW in a garage?
The Australian notice advises affected vehicles be parked outdoors, away from structures and other vehicles, until the recall is completed.
Is the repair available now?
The notice says BMW will contact owners once a remedy is available. Required recall repairs will be free of charge.