Code table of common faults on LG washing machine

For LG washing machines , when used for a long time, the electronic board displaying LG washing machine error codes is not too strange. However, not all consumers understand these LG washing machine error codes, especially those who are new to these products. Here, WebTech360 will summarize common error codes on LG washing machines and how to engrave each case so that readers can handle and use the washing machine most effectively.

Common LG washing machine error codes

1. IE error code - The washing machine is not supplied with water

Reason:

- Due to dehydration or blocked water supply.

- The water pressure is not strong enough to bring water to the washing machine.

- Because the water supply hose is blocked or blocked.

How to fix:

- Check if the water source is working or not.

- If the water pressure is not strong enough, use a combination of automatic booster pumps.

- Check whether the water tap is blocked by foreign objects.

Use a booster pump when the water pressure is too low

2. Error code 0E - Water in the container cannot be released

Reason:

- The placed drain hose is blocked by a foreign object or dirt.

- Exhaust pipe set higher than the prescribed level.

- Exhaust pipe is twisted, blocked at a certain section.

How to fix:

- Check the water filter slot, clean the filter head from dirt.

- Put the outlet of the drain hose to the ground.

- Check to see if the drain is blocked or twisted anywhere.

3. UE error code - The washing machine cannot spin

Reason:

- The washing machine is unbalanced, being different from the floor.

- There is an uneven distribution of clothes in the washing bucket.

Remedy :

- If there is a difference in the washing machine, re-align it to balance on the floor.

- If clothes are unevenly distributed in the drum, pause the washing cycle, open the lid, evenly arrange the clothes in the drum, then close the lid and let the machine operate normally.

Arrange for clothes to be evenly spread in the drum when the machine indicates a UE error

4. Error code dE - The washer cover is still open

Reason:

- The lid is not closed tightly.

- Something is stuck that prevents the lid from closing properly.

Solution: Check if the lid is stuck, jammed, then close it tightly so that the machine can operate normally.

5. FE error code - Water overflow or water leak

Reason:

- Due to the opening of the water hose in contact with the washing machine.

- Because the sensor inside the washing machine does not work.

Treatment:

- Check the end of the water hose for leaks.

- If, after checking and handling, this error has not stopped, you should contact the company for support.

Check the water hose again if there is a water leak.

6. Error code PE - Float fault in the machine

Cause: The pressure float in the machine is damaged or malfunctioning.

How to fix: This error is related to the hardware of the device, you should contact the company for advice and support.

7. Error code AE ​​- Power is not of an guarantee quality

Reason:

- This error occurs when there is a voltage difference from the working voltage of the washing machine.

- Maybe because the voltage sensor is not working properly.

How to fix:

- Check if the power source is overvoltage or not.

- If the situation persists, please contact the technical support staff.

8. Error code CL - Child Lock (Child Lock) is activated

When the electronic panel displays this code, the lid of the washing machine will be locked and the keys will not function. To exit this mode, you need to first turn on the power, then hold down the "Child Lock" button for 3 seconds. After this step the screen will no longer show CL and you can use the push button normally.

“Child Lock” is one of the essential safety systems of the washing machine

Hardware related error codes

List of hardware error codes:

Error code CE - Motor power failure: Due to insufficient voltage in the motor supply.

Error code E3 - Motor sensor error, belt: Damaged engine or belt

DHE error code - Drying motor error: The drying motor has malfunctioned or is damaged

Error code A £ - Power board error: Power board is not running or is shorted

SE error code - Sensor error: Due to the sensor malfunction or stop working.

Repairing and replacing washing machine hardware is not a simple thing

How to fix:

For hardware-related washer failures, it is difficult to handle it urgently. Dealing with these errors requires the support of specialized tools and certain expertise, so users should call the distributor, customer care department for full support. love. Technical experts will be able to help you with these critical errors.

The best selling washing machine products LG 2017 today:

Understanding LG washing machine error codes not only helps you during use, but also helps keep the machine more durable as you promptly fix the errors you are experiencing. Hopefully, after this article, readers will be able to handle the washing machine error situation to use the washing machine in the best way. If you still have any questions, you can send a message directly to the comment section below.