Pump Water Bottle Recall: How to Check Your Bottle and What to Do Next

Australia-wide recall, November 3, 2026: Coca-Cola Europacific Partners Australia has recalled five Pump and Super Pump bottled-water products because a packaging fault may allow the white drinking sipper to detach, creating a potential choking hazard. The recall covers specified bottles with best-before markings up to and including January 22, 2028. If you have an affected bottle, do not drink it; return it to the place of purchase for a full refund.

The recall was published on November 3, 2026 by Food Standards Australia New Zealand (FSANZ), and the manufacturer issued its own Pump product recall notice on the same date. The details below reflect those notices, not an unverified social-media warning. This is a recall of bottled drinks and their packaging, not a general recall of reusable water bottles or every Coca-Cola product.

Which Pump water bottles are recalled?

Check the name and bottle size first. The official Australian notice lists the following five products:

For these products, the recall applies to all best-before markings through January 22, 2028, inclusive. A bottle marked January 22, 2028 is included; a later marking is not covered by this particular date range. If the marking is rubbed off, unclear, or missing, contact the company or the seller before deciding the bottle is unaffected. The official notices do not require consumers to match a separate lot-number list for this recall.

How to check your bottle in three steps

1. Read the front label. Confirm that it is one of the five Pump or Super Pump products listed above, including the flavor and bottle volume. A similar-looking bottle is not enough to establish that it is recalled.
2. Find the best-before marking. Look for the printed date on the bottle or its packaging. Compare it with January 22, 2028. Do not confuse the best-before date with the day you purchased the drink.
3. Set affected bottles aside. Do not drink from them or test whether the white sipper comes loose. Arrange a return to the retailer for a full refund. If you are unsure about the product or marking, keep the bottle and ask the supplier for clarification.

The safest check is the product identification and date, not whether the cap looks normal. A packaging fault may not be obvious from a quick visual inspection. Do not pull, twist, or deliberately stress the drinking spout to see whether it detaches; such a home test is not part of the official recall instructions.

Why was Pump water recalled?

The identified problem is a packaging fault involving the white sipper on the bottle. According to FSANZ, the sipper could dislodge and present a choking hazard. This is why the regulator says consumers should not drink the affected products. The announcement does not establish that the water itself is contaminated, nor does it confirm how many sippers have detached or how many people, if any, have been injured. Avoid treating those unknowns as established facts.

A choking hazard is particularly important because a detached small component can obstruct breathing. If someone is choking and cannot breathe, speak, or cough effectively, call 000 in Australia immediately and follow the emergency call-taker's instructions. Anyone worried about a possible swallowed component or symptoms after using a recalled bottle should seek medical advice. Do not wait for a refund process to address an urgent health concern.

Where were the affected bottles sold?

FSANZ says the recalled products were distributed nationally across New South Wales, the Australian Capital Territory, Queensland, Victoria, Tasmania, South Australia, the Northern Territory, and Western Australia, as well as online. Sales channels included Woolworths, Coles, Aldi, independent food retailers such as IGA, petrol stations, convenience stores, newsagents, vending machines, and other retail outlets.

That broad distribution matters: a bottle bought from a small shop or vending machine should be checked just as carefully as one purchased at a major supermarket. The notice does not identify individual affected store locations, so there is no basis to assume a particular outlet was excluded. The relevant questions are whether your bottle matches the listed product and whether its best-before marking falls within the recall range.

What should you do with an affected Pump bottle?

Stop drinking it and return it to the place of purchase for a full refund. FSANZ provides this instruction for affected products. The manufacturer's announcement adds that consumers can return unopened affected products with clearly visible best-before dates to the place of purchase. If your bottle has already been opened, the marking is unreadable, or it came from a vending machine or online order, contact the retailer or Coca-Cola Europacific Partners to clarify the return arrangements instead of assuming a refund method.

Keep the bottle and any available purchase information until the return is resolved. Do not give it to someone else, reuse the drinking sipper, or remove the cap to continue drinking from an affected product. The regulator's direction is not to drink the recalled product; attempting to work around the cap fault is not an officially recommended remedy.

Who can answer questions about the recall?

The company named in the notice is Coca-Cola Europacific Partners Australia Pty Ltd. Its recall contact details are:

• Telephone: +61 2 8249 9113
• Email: Consumer_information@ccep.com
• Company notice: Official Pump recall announcement
• Regulator notice: FSANZ Pump Spring Water recall

When contacting the company, give the exact product name, bottle size, best-before marking, and where you bought it. This makes it easier to confirm the next step if your situation does not fit the standard unopened-bottle return instruction. You can also consult the NSW Food Authority recall listing for an additional official Australian notice.

Common questions about the Pump water recall

Does the recall include flavored Pump water?

Yes. Pump Watermelon Hit, Pump Berry Storm, and Pump Lime Rush in 750 mL bottles are included when their best-before markings fall within the specified range. The recall is not limited to plain spring water.

Does every Pump bottle have a defective sipper?

That has not been established. The recall identifies products at potential risk; it does not mean each individual bottle has a detached part. Consumers should follow the recall even when a bottle appears intact.

Can I drink it if I remove the sipper?

The official instruction is not to drink affected products. Removing or modifying the cap is not offered as a safe workaround. Return the bottle instead.

Is January 22, 2028 the date the recall was announced?

No. The recall was published on November 3, 2026. January 22, 2028 is the inclusive cutoff for the products' best-before markings. These dates serve different purposes.

Does this recall apply outside Australia?

The cited FSANZ notice covers Australian distribution, including online sales in Australia. It does not by itself confirm that the same recall applies to stock sold in other countries. Consumers elsewhere should check their own food-safety authority or ask the supplier.

Quick recall checklist

• Is the bottle one of the five named Pump or Super Pump products?
• Does its size match 750 mL or 1.25 L as listed?
• Is its best-before date on or before January 22, 2028?
• Have you stopped using an affected bottle and kept it for return?
• Have you contacted the retailer or manufacturer if the date or refund process is unclear?

Bottom line: This is a confirmed Australian recall issued November 3, 2026, involving a potential choking hazard from the white bottle sipper. Check the exact product and best-before marking, do not drink affected bottles, and arrange a full refund. Use the official notices for any subsequent changes to the recall scope or instructions.