The secret to using water heaters comfortably but still saves 50% of electricity

Water heaters can consume quite a lot of KW of electricity if you use them incorrectly. So how to use the most efficient water heater ? Let's find out with WebTech360 through the article below!

Choose a water heater that suits your needs

Currently on the market, there are 2 popular types of water heaters: direct water heaters and indirect water heaters . Depending on the type of water heater, the amount of electricity consumption is more or less. Usually, indirect water heaters with a larger storage capacity will use more electricity. If your family has 2 - 4 members, you should install a 20 liter type. You should not choose bottles with too large capacity (50 liters) to use to release the gas without fear of running out of hot water, wasting electricity, heat and not using up water.

Ariston an2 30 rs 2.5 fe water heater is the ideal choice for a family of 3 - 5 people

You should pay attention to the types of containers wrapped with insulating cotton (keeping heat) to limit heat loss to the environment, keeping hot water longer.

>>> See more: Choose to buy water heaters directly or indirectly .

Only turn on when necessary

Forgetting to turn off the hot water heater after using it or turn it on 24/24 will consume a lot of power as well as cause danger and easily leak electricity due to overload operation. With indirect water heater, you should turn on the machine 15 - 20 minutes before showering and during the shower remember to disconnect the power to ensure safety. If you use the water heater directly, you should only turn it on when there is a need to use it and turn it off immediately after using it.

You should not turn on the water heater 24/24

In addition, you should also arrange for family members to use water heaters one after another. Or you can turn the machine on once for the whole family to use it with an indirect water heater, helping to avoid wasting electricity because the device doesn't have to heat the water many times.

Lower the water heating temperature

To get the water hot quickly, you usually turn the temperature to its maximum. However, you only need to reduce 5 degrees Celsius to save 3 to 5% of the monthly electricity consumption. Furthermore, water that is too hot will burn the user and make it difficult to test the water temperature.

Check your water heater regularly

It is best to check your water heater about 1 month / time to ensure safety during use. In addition, you also need to clean the bottle and the filter, check the valves to see if they are sure or not within about every 2-3 months to help the machine work better.

If during the process of using the water heater, there are problems such as leaking, making strange noises .... then you should immediately call the service and maintenance center for timely repair. Because leaks in water heaters will easily endanger people's lives, causing electricity bills to skyrocket.

During the use of the water heater, cleaning and maintenance should be done regularly

Choose products equipped with modern technology

Products with reputable brands will be applied with many modern technologies to help save electricity. Do not choose to buy a water heater that is too old as well as a brand that is well-known in the market.

A good water heater must operate smoothly without causing annoying noise. Therefore, you need to test or run the test before buying to avoid having to regret when buying.

Hopefully this article of WebTech360 can help you use a "drop gas" water heater but still optimize power savings.