What to do when the air conditioner does not receive the signal from the remote?

If the remote of your air conditioner has a problem that causes a lot of trouble, please refer to the following article of WebTech360 to find out the cause and how to resolve the consolidation.

1. Remote gets wet

During use, you accidentally leave the remote in water and cannot control the air conditioner anymore. At this point, you should stop using the remote and immediately remove the battery, then wipe it dry before inserting the battery. Or you can also use a hair dryer to dry it remotely when wet.

If the remote gets wet, then you should pause using the remote and immediately remove the battery, dry, clean.

2. Remote dropped, impacted or subjected to strong force

For long-time remote use or poor quality goods, it will be easy to be damaged and short circuit when dropped or hit hard. Remote after falling broken but still repaired, you bring to a service center and repair to save costs. If you can't repair it, you'll need to buy a new remote. Note, you should choose to buy genuine and reputable to extend a long-term use time.

Remote after falling broken but still repaired, you should bring to a service center for repair.

3. The remote's magic eye is damaged

The magic eye (signal light) located at the top of the remote is responsible for transmitting a signal to connect to the air conditioner. When not being cleaned periodically, my eyes will be covered by dirt and obscured, thereby making the signal transmission weak. You should gently use a cotton swab to wipe dust around the god's eyes.

If the remote's magic eye is damaged, then you will not be able to control your air conditioner. In this case, you need to buy a new remote, as the cost of replacing the magic eye is roughly the same as the cost of buying a new remote.

4. Remote battery exhausted

Symbols displayed on the screen are dim, sometimes hidden, lights are low, and press while eating or not are common symptoms when the remote is low on battery. The best way to fix this situation is to replace the battery with a new one for the remote to work better.

Replace the new battery for the remote to make the air conditioner work better.

5. The air conditioner's divine eye is faulty

The air conditioner's eye is the part that receives the signal from remote. Although the remote control is working properly, but if the air conditioner has a problem, you can not use the air conditioner normally.

The damaged air conditioner's eye cannot receive the signal from the remote.

After you have carefully checked the remote and sure that the remote is working properly but the air conditioner still does not receive the signal, it is only possible that the error is caused by the machine's eye malfunction. If this is the case, you should contact the company's warranty center to check and give the most reasonable solution.

Hopefully the above article will help you find the cause and remedy direction when the air conditioner does not receive the remote signal.