What to do when the refrigerator light is not on?

The refrigerator light acts as a signal to the heat sensor to help maintain the appropriate temperature for food storage and keeps the refrigerator's open light function making it easy to get the food inside. However, after a long time of using the refrigerator bulb suddenly no longer lights up every time you open the door. So, what is the reason why the refrigerator does not light up?

Causes and ways to fix the refrigerator does not light

Cause the refrigerator does not light

- The light is on but the refrigerator is not running, it is best to call a professional refrigerator repairman because it can be due to complicated failures in compressor relays, defrost timer, compressor. or thermostat….

- If you open the door of the refrigerator and see that the machine is still running smoothly but the light is not on, the drain may be stuck or the light bulb may be burned, broken and not working.

- If the light in the lower compartment does not light and there is no sound when opening the cabinet, check if the power cord is loose or not? Maybe the refrigerator's power has been cut off. You should check whether the power supply and the power plug of the refrigerator are stable!

- Light switch is stuck. In the light unit, there will be a small switch so that when the refrigerator is closed, the door will press on this switch and disconnect the power source into the bulb to save electricity. When opening the door of the cabinet, the switch will inflate itself so that the power source comes in to light the lamp. Check if this switch is stuck to fix it

- The light is on but the refrigerator is not running, it is best to call a technician to have it repaired as it could be due to complicated damage to the compressor relays, defrost timer, compressor or regulator. temperature…

The power to the refrigerator has been disconnected. Check the power supply and re-plug the power plug.

How to change the refrigerator light bulb

Changing the bulbs for the refrigerator is not too complicated, so you can fix it yourself through the following steps:

- First, to replace the refrigerator lamp, you need to buy a bulb of the same type as the old one. Refrigerator bulbs are sold at electronics stores. To make sure you buy the right bulb for the refrigerator you can bring a damaged bulb to buy the right one of the same size.

- Then, you need to unplug the refrigerator before proceeding to remove the ball to protect yourself.

- The bulb in the refrigerator will usually be a swirl bulb, so you can easily remove the bulb by rotating the bulb a few times.

- You use a tuavit to open the protective cover of the bulb, then use your hand to twist the bulb in a spiral to take out the bulb, attach a new bulb to the refrigerator following the opposite steps.

- Finally, you can install the new bulb in the old place.

Changing the light bulb for the refrigerator is not too complicated, so you can fix it yourself

In addition, if the light is on but the refrigerator is not running, it could be a failure of the compressor relay, defrost timer, compressor or temperature regulator. The best way is to call a mechanic or an air conditioning service to have it repaired. You should refer to the signs that you should replace a new refrigerator so that you can recognize and fix the earliest signs of a damaged refrigerator.

Above are some of the reasons the refrigerator does not light and how to fix it. Hopefully with the information that WebTech360 shares, can help you overcome the above situation.

>>> See more:  Instructions on how to use the refrigerator properly and effectively