Verified and updated: 19 November 2026, 21:15 UTC.
Australia’s Cheaper Home Batteries Program still offers a government-funded discount for eligible systems, but the amount now tapers with battery size. Since 1 May 2026, the discount calculation has applied the full support factor to the first 14 kWh of usable capacity, 60% to the next 14 kWh, and 15% to capacity between 28 and 50 kWh. The practical result: a larger battery may add useful storage, but each additional kilowatt-hour above 14 kWh attracts less support.
The ACCC’s May 2026 estimates put a typical 13 kWh system at A$6,500–A$9,700 before the federal discount, with an estimated A$3,400 discount for an installation on 1 July 2026. These are indicative figures, not a current quote or guaranteed rebate. Your installed price and support depend on the system, installation date, usable capacity and site requirements.
Destaques
- The federal program applies to eligible batteries connected to new or existing rooftop solar.
- Since 1 May 2026, the discount tapers above 14 kWh and again above 28 kWh.
- ACCC estimates for a 13 kWh system: A$6,500–A$9,700 before an estimated A$3,400 discount on 1 July 2026.
- Bill savings depend on how much solar you store and use, your tariff, system costs and any VPP arrangement.
What changed in the Cheaper Home Batteries Program?
The national program is administered through the Small-scale Renewable Energy Scheme. The Department of Climate Change, Energy, the Environment and Water says eligible households, businesses and community organisations can receive support for battery systems from 5 kWh to 100 kWh, connected to new or existing solar PV. The advertised “around 30%” is a general program description; it should not be treated as a fixed rebate on every quote.
From 1 May 2026, the support calculation became tiered by capacity. The applicable STC factor is also scheduled to decline every six months. The factor for May–December 2026 is 6.8; the amount of support is determined by the factor on the installation date. Ask the retailer to show the discount amount, how it is applied, and the assumptions used. Most customers receive the reduction through an installer or retailer, and do not need to apply to the department directly.
Official guidance and program details are available from the Department of Climate Change, Energy, the Environment and Water and energy.gov.au’s battery guide.
How much does a home battery cost in Australia?
The ACCC’s June 2026 National Electricity Market report estimates pre-discount prices, including GST, using market and program data. Its representative 13 kWh system (up to 14 kWh) is estimated at A$6,500–A$9,700 before support; a 19 kWh system is A$13,600–A$15,800; and a 42 kWh system is A$20,000–A$37,800. Estimated program discounts for installations dated 1 July 2026 are A$3,400, A$4,500 and A$6,500 respectively.
These figures are a useful benchmark, not a promise of what you will pay today. The ACCC notes that subsidy estimates include only the federal program. A quote may vary with the inverter, switchboard work, backup circuits, wiring, site access and local labour. State or territory schemes may also be available, but conditions differ and should be checked with the relevant government.
Compare at least two written, itemised quotes. Check that they state usable capacity, inverter output, installation work, warranty terms, the exact discount, and whether backup power is included. The ACCC found that battery sizing can be a concern: in some circumstances, a large battery paired with a small solar system may not fill reliably. Bigger capacity does not automatically mean better value.
How much can a battery save on power bills?
A battery stores excess rooftop solar for use after sunset, which can reduce electricity bought from the retailer. Savings may also come from shifting use away from peak tariff periods or participating in a virtual power plant (VPP). But savings are household-specific: solar output, evening demand, feed-in tariff, import prices, battery efficiency, export limits and any VPP payments all affect the result.
The federal energy department cautions that bill savings may not repay the battery cost within its warranted lifetime. Request a written estimate of expected savings and payback, and compare it with your own bills and usage data. Treat forecasts as estimates, not guaranteed returns. For an independent starting point, use the government-recommended SunSPOT calculator, then ask the installer to explain differences between its estimate and the quote.
What should you check before installing a battery?
- Confirm the battery is listed as an approved product and the installer holds the required Solar Accreditation Australia accreditation.
- Check the system’s usable capacity and output against your evening consumption and solar production.
- Confirm how the quoted federal discount is calculated and when it will be applied.
- Ask what backup circuits will operate during an outage; a grid-connected battery does not necessarily provide backup unless designed and configured for it.
- Review VPP terms, including how the operator can control the battery, any payments, and the impact on stored energy during an outage.
The department says on-grid systems supported by the program must have the technical capability to participate in a VPP. Capability does not mean you must join one; ask what participation involves before agreeing to terms. Read the ACCC’s June 2026 market report for its cost analysis and consumer findings.
What happens next for battery rebates and prices?
The program’s STC factor is scheduled to decline over time through 2030, and the government says discount settings will be reviewed at least annually. This is a confirmed program schedule; it does not establish how quickly retail prices will move or whether a particular household will save more by installing now. Get a current written quote and compare its net cost with the value you expect from stored solar, instead of relying on a general claim that prices or rebates will make a future date better.
Frequently asked questions
Can I get the federal battery discount if I already have solar?
Yes. Eligible batteries can connect to new or existing rooftop solar, subject to program rules and approved products and installation.
Does a home battery guarantee lower bills?
No. It can reduce grid purchases, but the savings depend on your household’s usage, solar output, tariff and system costs.
Do I have to join a virtual power plant?
The supported on-grid system must have VPP capability. Ask the retailer whether enrollment is optional and review the VPP’s operating and payment terms.