How to enable IPv6 on your TP-Link Wi-Fi 6 router

All modern wireless routers, including those manufactured by TP-Link, can use IPv6 addresses for internet connections. Your internet service provider should offer IPv6 connections, and, if it does, you should enable IPv6 on your router. The benefits of making this switch include better security and slightly better speeds. Therefore, here is how to activate IPv6 on any TP-Link router with Wi-Fi 6:

Contents

1. How do I find the IPv6 settings on my TP-Link Wi-Fi 6 router?
2. How to enable IPv6 on your TP-Link Wi-Fi 6 router
3. BONUS: Set how the TP-Link Wi-Fi 6 router uses IPv6 addresses in your network
4. Any problems with enabling IPv6 on your TP-Link Wi-Fi 6 router?

NOTE: This guide was created on a TP-Link Archer AX10 wireless router, but the steps involved are the same on all TP-Link routers with Wi-Fi 6. If you are not familiar with IPv6 and IPv4 addresses, we recommend reading: What is an IP address and a subnet mask, in simple terms?

How do I find the IPv6 settings on my TP-Link Wi-Fi 6 router?

Before activating IPv6 internet connections and addresses on your TP-Link router, you must access the appropriate settings. This can be done only from the firmware of your TP-Link router and not from the Tether app. Therefore, open a web browser on your computer, and navigate to tplinkwifi.net or 192.168.0.1. Next, enter the admin password for your TP-Link Wi-Fi 6 router, and press LOG IN.

Log in to your TP-Link Wi-Fi 6 router

TIP: If none of the two addresses mentioned above work, see all the ways to find the IP address of your router. Also, if the TP-link firmware is not in the language you want, here is how to change the language on your TP-Link Wi-Fi 6 router.

At first, you see the network map and some basic settings. The IPv6 settings can be found by clicking or tapping on Advanced.

Go to Advanced

In the left sidebar, scroll down and press IPv6. Then, you can see all the IPv6 settings of your TP-Link router on the right.

Go to IPv6 in the column on the left

TIP: If you want to manage your TP-Link router from anywhere on the internet, here’s how to create and add a TP-Link ID to your TP-Link Wi-Fi 6 router.

How to enable IPv6 on your TP-Link Wi-Fi 6 router

In the IPv6 Internet section on the right, set the IPv6 switch to On.

Activate the IPv6 switch

By default, your TP-Link router should use the same internet connection type and settings as it does for IPv4. However, if you are not happy with the settings, click or tap the “Internet Connection Type” drop-down list, choose the appropriate type, and enter your settings.

Set the Internet Connection Type

Our internet connection is PPPoE, and the TP-Link Wi-Fi 6 router correctly checks the option to “Share the same PPPoE session with IPv4,” meaning that there was no other configuration left for us to do. However, if you have a different internet connection type, like Static IP or 6to4 Tunnel, you may need to enter your specific settings. There’s also an Advanced Settings link available.

Access the Advanced Settings

Pressing Advanced settings reveals more configuration options where you set how the router gets IPv6 addresses. We recommend using Auto or Specified by ISP (after talking to them to get the necessary settings). You can also set what DNS addresses are used. If you want to use custom ones, choose “Use the Following DNS Addresses” and enter the IPv6 addresses of your favorite DNS servers.

Customize how IPv6 works on your TP-Link router

When you are done setting things up, don’t forget to press Connect, so that the TP-Link router connects to the internet using your new settings and starts using an IPv6 address.

Press Connect to use IPv6

Your internet won’t work for a couple of seconds while the router establishes the connection through IPv6.

TIP: If you want the best performance from your TP-Link router, it is a good idea to update its firmware. Read this guide to learn how: 2 ways to update the firmware on a TP-Link Wi-Fi 6 router.

BONUS: Set how the TP-Link Wi-Fi 6 router uses IPv6 addresses in your network

When you enable IPv6 using the steps above, your TP-Link router also uses IPv6 addresses for the computers and devices inside your network. These work in parallel with the older IPv4 addresses. Therefore, you shouldn’t worry about not accessing computers and devices using the shorter IPv4 addresses. However, if you want to configure how the TP-Link router assigns IPv6 addresses on the IPv6 page, scroll down to the IPv6 LAN section on the right. Then, change the Assigned Type and the Address Prefix the way you want.

The IPv6 LAN section

However, for most users, the defaults used by the TP-Link router work just fine, and there’s no need to change anything.

Any problems with enabling IPv6 on your TP-Link Wi-Fi 6 router?

After we make the initial setup of a TP-Link Wi-Fi 6 router, we always access the advanced settings to enable IPv6. This is because we want to enjoy an internet connection that’s slightly faster and more secure. We recommend that you do the same using the steps from this guide. When done, let us know in a comment if you encountered any problems and whether you have questions about the whole process.