Home
» Wiki
»
How to use Panasonic air conditioner in the most detailed way
How to use Panasonic air conditioner in the most detailed way
Panasonic air conditioners also have 1-way and 2-way types, using Inverter technology or not... But no matter which type of Panasonic air conditioner, the basic usage is quite similar, the only difference is in the new features on the high-end line.
Below, Quantrimang will guide you on how to use Panasonic air conditioner in detail for each mode, how to set the timer, how to turn it on and off, and tips for saving electricity.
When the air conditioner is on, press the ON/OFF button again to turn off the air conditioner.
Modes on Panasonic air conditioner
After turning on the Panasonic air conditioner, to adjust the modes on the air conditioner, you need to press the MODE button on the remote control and then select one of the following modes:
AUTO (automatic mode) : In AUTO mode, the air conditioner will automatically adjust temperature and humidity parameters to a predetermined level (temperature around 23 - 25 degrees Celsius).
COOL (cooling mode) : This is the cooling or refrigeration mode of the machine. You can increase or decrease the temperature according to your needs by pressing the TEMP button up ▲ (increase temperature) and down ▼ (decrease temperature).
DRY (dehumidification mode) : When DRY mode is turned on , Panasonic air conditioner will perform the task of dehumidifying the room. People often use this mode on humid, wet days.
HEAT (heating mode) : HEAT heating mode is usually only available on Panasonic 2-way air conditioners. You can use HEAT mode to warm up the room in winter.
FAN (fan mode)
E - ion/ Ionizer (air purification and ion generation function) : This function is often available on Inverter air conditioners. When this function is turned on, about 20,000 negative ions will be created, helping to make the air in your room fresher.
POWERFUL (fast cooling function) : Similar to COOL, POWERFUL is a cooling function but at a faster speed.
QUIET (Noise reduction function) : Normally, the air conditioner will make noise during operation. You can use this feature to minimize the noise in the room. QUIET is often used when going to bed. To cancel this mode, just press the select button 3 times in a row.
Panasonic air conditioner control
How to adjust fan speed (FAN SPEED) of Panasonic air conditioner
To change the fan speed on Panasonic air conditioner, just press the FAN SPEED button 1 - 4 times:
1st time: Low fan mode
2nd time: Medium fan mode
3rd time: High fan mode
4th time: AUTO FAN mode
Panasonic air conditioner wind direction adjustment
To adjust the air conditioner's wind direction, press the AIR SWING button and select the appropriate mode.
How to set timer for Panasonic air conditioner
Timer off and timer on both perform the same operations but differ in the timing of execution. For example, set timer off when the air conditioner is running, set timer on when the air conditioner is not running.
To set the timer for Panasonic air conditioner, follow these steps:
Step 1: Select ON TIMER
Step 2: Select the time to turn on the air conditioner using the ▲ (increase) and ▼ (decrease) buttons.
Step 3: Select the ON TIMER button again. To cancel, select CANCEL .
How to save electricity when using Panasonic air conditioner
At this point, using Panasonic air conditioners is certainly no longer difficult for you, right? So how to save electricity when using this device? It's simple, just follow these instructions:
Choose an air conditioner that is suitable for the room volume : You should keep this in mind when buying an air conditioner. If the air conditioner's capacity is smaller than what is needed for your room volume, the air conditioner will have to operate continuously to maintain the temperature, which will quickly damage the air conditioner, cool slowly, and waste electricity.
Always turn on the air conditioner at an average temperature above 23 degrees Celsius: In the summer, we often have the habit of turning on the air conditioner at the lowest level. However, according to experts, using the air conditioner at too low a temperature will be harmful to health, cause the air conditioner to break down quickly and consume a lot of electricity.
The temperature difference between the room and the outside should only be a maximum of 10 degrees Celsius : If the temperature difference between the room and the outside is too large (over 10 degrees Celsius), the air conditioner will have to work at a very high capacity to balance the heat. In this case, the air conditioner is very susceptible to damage and consumes a lot of electricity.
You should close the door when turning on the air conditioner : A closed room will prevent air from leaking out of the room and vice versa. This helps the air conditioner not have to work as hard to balance the temperature, thereby saving electricity. However, you should not close the door too tightly to avoid affecting your health.
Regular cleaning : Dust is one of the reasons why air conditioners are easily damaged, work efficiency is reduced and obviously will consume more electricity. Therefore, clean the air conditioner regularly, at least once every 6 months.
Turn on the air conditioner timer when going to bed : The temperature at night is usually lower than during the day, so there is no need to turn on the air conditioner all night. Turn on the air conditioner timer when going to bed to save electricity and protect your health.
Regular air conditioner cleaning helps save electricity
Hopefully our sharing will help you know how to use Panasonic air conditioners easily and save electricity. Visit META.vn for advice and to order quality, cheap Panasonic air conditioners.