How to use steam iron effectively, save electricity

See the ad to see the steam iron is good for use, more convenient than the dry iron, you also quickly take home one but do not know how to use it effectively? WebTech360 reveals a few tips for using steam irons to save electricity, efficiency and safety.

Add clean water without additives and aromatherapy for steam irons

Water used for steam irons must be clean , free from impurities, additives or fragrances. For some steam irons, the manufacturer recommends using distilled water but not all houses have distilled water, so you just need to put in clean water to meet the requirements.

If using tap water, it is necessary to filter again because tap water often contains impurities. Absolutely do not add flavors or additives, when the iron heats up, these substances will cause corrosion of the internal equipment of the steam iron.

The capacity of the water tank per steam iron is usually different, but the amount of water in should be at least of the tank capacity , not less than to ensure stable and efficient operation of the steam iron.

Adjust the steam iron's ironing temperature to suit your fabric

Each fabric material will have an appropriate ironing temperature , if you set the temperature too low, wrinkles will not be straightened, but if the temperature is too high, the fabric may be damaged, burned ...

For all kinds of cotton, linen, you should adjust your iron to high temperature, high steam volume; The temperature of wool is medium or high; Select the lowest temperature and steam content for nylon, polyester, silk or synthetic fiber.

In addition, some steam irons on the thermostat have heat indications that are suitable for each fabric, you just need to turn the knob to the corresponding temperature for the fabric to be ironed, you can straighten clothes quickly. , safe and convenient.

Note that after adding water to the iron, plugging in the power cord, adjust the knob to 0 degrees, wait about 5 minutes for the iron to heat up, the water spits out in the form of steam, then you will adjust the temperature and start. Do not iron clothes, do not iron steam right after plugging in the power cord because water can flow out causing wet clothes, irons and loss of safety for users.

Iron your clothes with a low to high steam iron option

During the ironing process, you do not change the temperature suddenly like thin, light ironing at low temperature, you immediately set to high temperature to iron thick clothes, then adjust back to low temperature. Doing so will waste much energy and also shorten the life of your steam iron.

Therefore, it is best before ironing, you should sort out the fabrics, separate cotton clothes, separate silk, felt, and wool, then choose the ironing temperature and start "sweeping" all the pants. shirt. At this time, you will iron the clothes with the low temperature first, then the clothes that are suitable for high temperature , so the ironing time is also faster and more energy efficient.

Clean steam irons regularly

Every time you finish ironing, you should clean your iron thoroughly before storing it. You clean the iron surface with a soft towel soaked in warm water, if there are stains, you do not use sharp objects, strong detergents to clean because it may damage the non-stick layer of the iron, remove the stain. dirty with warm water, mild detergent. With the steam vents you clean using a cotton swab very easily and simply.

Make sure to empty the steam iron tank after ironing everything, avoid impurities mixed in with water, cause clogging of the evaporation system, shorten the life of the iron, iron clothes that are not clean. You should choose the self-cleaning feature after each use, so that the steam iron is completely clean before storing.

After using the iron or when not in use, turn the knob to zero to ensure family safety, especially for young children.

Tips for using other energy-efficient, steam irons

Do not iron when they are still wet, let them dry completely before ironing. Put a piece of aluminum foil under the table to iron clothes then put the iron on, the iron quickly transfers heat, iron well. Do not iron in air-conditioned rooms , turn on the fan because the steam iron will heat more. If you do not turn the iron on or off many times, then it has to heat itself many times, which is a waste of electricity.

Clean the iron surface before ironing for better heat conduction. Using steam irons with power saving mode, automatically disconnecting power when not moving, lying or tilted to help reduce maximum power consumption.

Steam irons, when they know how to use them properly and effectively, will make your ironing simple and easier than ever. If you have more tips for using steam irons, share them with everyone by commenting in the box below.

WebTech360