Keep Track Changes On When a Document Reopens
Enable persistent Track Changes for everyone in one ONLYOFFICE document, verify edits are recorded, and understand the limits of this setting.
How to set up IP and network DNS for Sony Internet TV
In the article below, WebTech360 will guide you through the steps to set up the IP address and DNS when Sony Internet TV is connected to the network.
Why should I set the network IP for TV ?
You need to set the IP address, network DNS for TV because:
- Each network needs an IP address, your TV will not be able to connect to the network without IP.
- Entering the correct IP, DNS is one of the ways to fix the error that TV cannot access the network.
Steps to set up IP and network DNS for Sony Internet TV
Step 1. First, press the HOME button on the remote, at Home interface select System setting, then select Setup. In the Setup menu, select Network and then select Network Setup, then select Set up network connection.
Step 2. The TV will display a message to select the Easy or Expert network setup method. Here we need to set up IP and DNS for TV, so you should choose Expert type.
Next, the TV will display a message to select the type of network you want to connect to is wired or wifi. Here, WebTech360 will catch the wifi, so it will select the Wi-Fi setting, then select Scan to have the TV scan for available networks. After the TV shows the list of networks, select the wifi you want to connect to, enter the password (if any), then select Finish.
Step 3. After connecting to the network, select the IP Address to proceed with IP and DNS settings for the TV.
+ If you want to leave the IP mode automatically: At the IP address setting interface, select Automatic. Then the TV will display a message about setting the TV to be a proxy server, you can choose Yes or no.
+ If you want to manually set the IP: In the IP address setting interface, choose Manual. Then just enter the IP address, the subnet mask, the default Gateaway, the primary DNS and the secondary DNS for the network. Once finished, click OK on the remote to save. Then the TV will show a message about setting the TV to be a proxy server, you can choose Yes or no.
After the steps of IP setting, DNS TV will display the message of successful internet connection, select Accept.
Note: To know the exact IP address of your home network, you should use a computer connected to the network to check. How to check as follows:
See more:
How to connect to the Internet on Sony TV Internet
Above are the steps to set up IP and DNS on Sony TV Interent, wish you success.
Trace the Upstream to Clear ONLYOFFICE’s Nginx 502
Find whether Nginx, Docker networking, or an internal ONLYOFFICE service is returning 502, then verify the corrected upstream and health check.
Trace the Save Callback When ONLYOFFICE Won’t Save to Nextcloud
Diagnose failed ONLYOFFICE saves by checking the Nextcloud callback route, proxy redirects, and storage logs, then verify the edited file persists.
Stop ONLYOFFICE Document Server from Running Out of VPS Memory
Find the cause of ONLYOFFICE memory crashes, check Docker limits, size VPS RAM correctly, add swap safely, and verify that documents open and save.
Trace a Failed ONLYOFFICE PDF Export to Its Source
Separate browser download problems from server-side conversion errors and use the right log or access check to get your PDF export working.
Resolve ONLYOFFICE’s “Token Is Not Valid” Error in Nextcloud
Match the JWT secret used by ONLYOFFICE Docs and Nextcloud, apply it safely for Docker or Linux installs, and verify the connection without weakening authentication.
Deploy ONLYOFFICE Workspace Community on Ubuntu 24.04
Install ONLYOFFICE Workspace Community on Ubuntu 24.04 with the official Docker script, check server requirements, skip Mail if needed, and verify the portal safely.
Set Up ONLYOFFICE JWT Secrets Across Server and Connector
Configure matching JWT secrets for ONLYOFFICE Docs and its connector, with safe steps for Linux packages, Docker deployments, and verification.
Put ONLYOFFICE Docs Behind HAProxy Without Breaking Editing
Configure HAProxy HTTPS, forwarding headers, WebSocket timeouts, and health checks for ONLYOFFICE Docs, then verify editing and saves.
Brand ONLYOFFICE Docs with Your Logo and Theme Colors
Give an embedded ONLYOFFICE Docs editor your company logo and interface colors with a custom theme file and editor configuration. See edition limits and deployment checks.