Home
» How to
»
Share how to fix common errors on rice cookers
Share how to fix common errors on rice cookers
Video Share how to fix common errors on rice cookers
The rice cooker helps a lot for housewives in the cooking process but does not bring a lot of trouble when something goes wrong. Therefore, in this article, WebTech360 Electric will guide you how to fix common errors on rice cookers at home.
The rice cooker is not in the electricity, it is plugged in to still power but the rice cooker is not hot
The rice cooker is not in the electricity, it is plugged in to still power but the rice cooker is not hot
Cause: The cord is damaged, the contact point between the cord and the rice cooker is poor, or the fuse is damaged. NC and NO contacts broken
Solution: You should reconnect the connection between the cord and the pot near the bottom of the pot. Try replacing the other connector if the cord is damaged.
The pot automatically bounces when the rice is not cooked
The pot automatically bounces when the rice is not cooked
Cause: The bottom of the rice cooker is bent, making the contact heat not enough, leading to the light automatically jumping, not tightly closing the lid. The thermal switch of the rice cooker was disconnected too soon, the heat plate was dirty because food was spilled and not cleaned during use, resulting in raw rice.
Remedy: Clean the heat germ thoroughly, check the thermal switch, if the thermal switch is too old, you should replace the relay. In case the bottom of the pot is bent, you should replace the inner pot.
Cook rice that burns at the bottom and wheezes at the bottom of the pot
Cause: The thermal switch is turned off late, setting the cooking mode too long, causing the rice to collect too much heat and the rice is burned. The non-stick layer of the pot is lost
The pot is burned and how to handle it
Remedy: Check the thermal switch again, if it is too old, you should replace the new relay. During cleaning, refrain from rubbing sharp objects.
The rice cooker light does not light
Cause: LED is shorted, leading to failure. Power cord is overloaded, fuse is damaged
Remedy: Replace the rice cooker LED lights. If you break the fuse, from the source you have a fuse that is usually hidden in a genome tube, then you just need to force her to go into the pot.
Above are some common basic errors encountered in the process of using rice cookers. Hope the above synthesis from WebTech360 will help you avoid using problems.