Manual Panasonic water heater

Water heater products from Panasinc are integrated with many interesting and unique features, giving users many conveniences. But not everyone knows how to use it properly to get the best out of a water heater. The synthesis of how to use Panasonic water heaters in this article from WebTech360 hopes to bring you useful knowledge.

Learn carefully the functions of each part on the water heater

Before using Panasonic water heaters, you need to understand the function of each part of the water heater to use it to suit each respective function.

Below are details of the parts on Panasonic water heaters:

Learn carefully the functions of each part of the water heater

Check that the anti-shock device of the machine is working or not

Check that the anti-shock device of the machine is working or not

For the most safety during use, you should check the anti-shock ELCB of the machine before use

First, turn on the power and supply water to the water heater. When the ELCB light is on and the operation will automatically power off the whole machine, the indicator light will be disconnected and the ELCB lever will drop. Let the machine operate normally and set the anti-shock mode. You push the ELCB handle back to the machine.

If the above steps are completed, the ELCB water heater anti-shock device is working normally.

>>> See more:  Integrated safety control system (TSS) on water heater

Used properly through the steps

Use water heater correctly

1. Before using, open the main water valve and turn on the power to the machine

2. Activate the ELCB anti-shock mode by pushing the ELCB lever up.

3. Turn the lock clockwise. Depending on the intended use, you turn clockwise or counterclockwise. Turning clockwise will increase the water flow rate and decrease the water temperature. Counter-clockwise locking will reduce the flow of water and increase the water temperature.

4. Press the On / Off button to let water drain from the shower. At this time, the ELCB light will light up.

5. Set the appropriate temperature.

Function buttons on Panasonic water heaters

Function button on Panasonic water heater

- Switch to adjust capacity, adjust temperature: Use to adjust the temperature by turning the knob to the desired position. There are different modes such as: Lo (lowest level of support), Med (Average level), Hi (High level of support).

- Valve lock and adjust the amount of water: You press the button to open / close the valve and adjust the large and small amount of water by moving the controller back and forth.

- Indicator light function: The ELCB light will light up when the ELCB anti-shock function is active.

- Button to adjust the spray pattern of the shower: Standard spray, gentle spray, large spray, coordinated spray, massage spray.

ELCB anti-shock button: detects leak, disconnects power as soon as it detects a leak, ensuring absolute safety for users.