7 Ways to Fix Clock Error In Computer Running Wrong Time On Windows 10

Certainly, the clock is an indispensable tool for you to schedule your work time in the most suitable way. Their utility has been integrated by the Windows operating system so that you can easily monitor any when you turn on the machine. But suddenly the clock in your device is running fast or slow, making you uncomfortable and don't know how to adjust the time . WebTech360  will show why  the clock in your computer is running wrong and the easiest way to fix it for you. Follow along and follow the steps!

Why is the clock in the computer running at the wrong time?

Computer running out of time is usually caused by 3 main reasons. Firstly, your computer is out of CMOS battery. The CMOS battery is exhausted, so it is not possible to save the settings on Windows. Second, the computer is freezing and before freezing you put the wrong system date and time. Therefore, even if you update it every day, it will still be wrong. The last cause is that the User you are using is not an Administrator account. Let's find out more about these reasons!

CMOS Battery Expired

CMOS batteries are similar in shape and size to large clock batteries and are found on the mainboards of all computers. This device is used to provide sustained power for the CMOS chip to be able to operate normally.

This part helps to store information about the configuration of other hardware in the PC. At the same time update the time continuously and take that as the standard date and time for the system. This is a common cause in older machines to explain why the clock in the computer is running at the wrong time.

And the simplest way to completely fix this error is to replace the CMOS battery with a new one. You can buy the battery at a computer repair shop, or the place where you bought the device. The cost to replace the CMOS battery is very cheap, only 10 thousand a PIN, guys.

Wrong time zone setting

Normally, the clock in a computer is set to the time zone. When the user selects the wrong time zone, the computer clock will also display incorrectly. For example, the time zone in Vietnam is (UTC + 7:00) Bangkok, Hanoi, Jakarta . If the user chooses a different time zone, the clock in the computer will display a different date and time.

Step 1: To check if the time zone set in your computer is correct, type Date & Time Settings in the search box.

Step 2: Then, scroll down and check the Time Zone box . If the time zone is different (UTC + 7:00) Bangkok, Hanoi, Jakarta , you proceed to choose again.

Step 3:  If you want to change the date and time server on your computer, go to Region then click  Additional date, time, & regional settings.

• In the Control Panel window , under Date and Time, click Set the time and date .

• In the Date and Time window, select Internet Time , then click Change Settings... as shown:

In the Internet Time Settings panel , click Update Now to update the latest time for users, you will see the correct time zone shown below, finally click OK to complete.

Windows Time

If the CMOS battery is still good but the computer clock only uses seconds or minutes for a long time, the error of the computer clock not running on time may be due to poor synchronization settings. This is one reason why the clock in the computer is running out of time.

To ensure that Windows synchronizes the correct time, press Windows+R , type services.msc into the Run menu bar . Next, you press Enter .

In the Services interface , proceed to find Windows Time in the Name column, right-click it and select Properties .

In the new setup dialog box that appears, change the line " Startup type " to " Automatic ", then click Start to start the process.

Finally, click OK to save.

Malware (Malware)

- Malware is also the culprit that explains why the clock in the computer is running at the wrong time.

- When the computer has been infected with a virus, the time on the computer will also be faulty. Perform a Reset or refresh the system to remove malware.

How to fix the wrong time by turning on the automatic time setting

The auto-set time feature is pre-set on the computers. Users can easily do this with three simple steps:

Step 1:  Type  Date & Time Settings  in the search box.

Step 2: Click Turn off the Set time automatically option (also known as automatically set the time) if this option is enabled. Then you turn this option back on immediately.

How to set the clock in the computer to the wrong time manually?

To adjust the clock in your computer to the wrong time manually, do the following:

Step 1: Access the item in turn Settings -> 

• You choose Time & language -> Date & time .

Step 2: Then, turn off the option to set the time automatically ( Set time automatically ). In the '' Change date and time '' section, click the Change button at the bottom.

Step 3: Select the correct current date and time. Next, click the Change button to start setting the new date and time.

And those are simple operations that help you understand the mechanism of action as well as how to fix it when the  clock in the computer is running at the wrong time. With this simple article, WebTech360  believes you will easily fix watch-related problems for a better experience.